Su socio de confianza en Soluciones de bombas de calor
Utilice el poder de la naturaleza Inspire esperanza para un futuro más verde
Process heat from ambient air — 95°C hot water, 85°C hot air, no waste heat needed.
For food, agricultural and textile plants that cannot justify a steam-system investment. Six industrial models, 220–1,500 kW, built in Foshan since 2004.
Product categoriesExplora nuestra gama de productos
Two main lines for self-funded plants, plus a steam line supplied for EPC and subsidised projects.
Industrial Heat Pump Solution
Empower industrial decarbonization with HETAPRO high-temperature heat pumps—delivering up to 150°C steam and ultra-efficient process heating to drastically cut boiler operational costs and carbon emissions.
Solución de bomba de calor residencial
Calefacción, refrigeración y agua caliente sanitaria: solución todo en uno
ERP A+++(35℃/55℃)
R290 refrigerante natural
Rango de operación: -25 a 45℃
Temperatura máxima de salida: 80℃
Solución de bomba de calor comercial
Enfriador modular combinable ErP R410a y R32, con kit de baja temperatura ambiente opcional y máximo 16 unidades en control de grupo, puede satisfacer todo tipo de aplicaciones comerciales.
Rango de capacidad: modelo único de 35 a 250 kW
Solución de sistema de agua Hydro Split
El sistema hidráulico es un sistema de agua todo en uno que incluye un Tanque de agua, tanque de amortiguación, y Tanque de expansiónEsto elimina la necesidad de instalaciones de sistemas de agua separados, lo que lo convierte en una opción conveniente para propietarios de marcas y distribuidores.
Where These Two Lines Fit
Hot water for process plants; hot air for drying plants. Neither needs a waste-heat stream.
† Steam and 135°C hot water are supplied for EPC / policy projects only and require a 55–85°C waste-heat stream.
Who You Are Actually Buying From
Built by HVAC Veterans, Not a Heat Pump Startup
Our engineering and sales leadership came from China’s largest HVAC manufacturers and have spent 20+ years in refrigeration and air conditioning. A heat pump is a refrigeration cycle first — that is our home turf, not a sideline we picked up when the market got hot.
Made for Your Engineers to Integrate
We supply the unit, the performance envelope and the documentation — your team specifies, installs and supports it. Controller language and supply voltage are configurable per project; RS485 / Modbus RTU on four models lets your engineers bring the unit into their own SCADA or BMS.
Right for Your Grid, Honest About Every Number
Every published figure carries its operating condition — the source and supply temperatures behind a COP, the duty behind a capacity. Datasheets and written test conditions travel with the unit for your engineer to check; if a value has not been measured, we leave it out. Where the grid is weak, every unit can be configured for PV direct drive — sized to your array and, if required, paired with battery storage so the line keeps running through load shedding. For plants paying for diesel or living with rationed power, that is a heat pump that works at 7 p.m., not just on paper.
Industrial High-Temp Heat Pump Solutions
Every figure below carries its operating condition. Where we have no value, we say so.

95°C Hot Water — Washing, CIP, Pasteurizing, Dyeing
The line most plants start with. It replaces a hot-water boiler or electric heater without needing waste heat. Atmospheric, no pressure vessel.
- OUTPUT 95°C hot water
- SOURCE ambient ≥10°C / water 60/52°C
- CAPACITY 350 kW single unit (MT-A2W)
- WATER SOURCE 1,500 kW single unit

85°C Hot Air — Product & Textile Drying
Clean, controllable hot air from 30 to 85°C for food, crops, herbs, timber and fabric — no combustion, no flue, no fire risk, and humidity control a gas dryer cannot give.
- OUTPUT 30–85°C hot air (60°C rated)
- INLET air 0–80°C
- CAPACITY 300 kW (MT-A2A)
- SUPPLY 380V / 3N / 50Hz

150°C Steam & 135°C Hot Water
Supplied where a 55–85°C waste-heat stream already exists and the economics are backed by a subsidy, carbon programme or EPC project. At 150°C, saturated steam is about 3.76 bar(g) — a steam-table value, not a machine rating.
- STEAM 110–150°C · 220 / 500 kW
- HOT WATER 100–135°C · 220 kW
- SOURCE 55–85°C waste heat required
- ONLY PUBLISHED COP 2.69–2.70 (MT-W2W)
ISO Quality Control & OEM/ODM Capability
Traceable documents and a factory you can audit — not adjectives.
Manufacturing Strength
Built in Foshan, Guangdong, since 2004. Configuration, supply voltage and refrigerant arrangement are specified per order; capacity and lead time are confirmed per configuration at enquiry.
- ISO 9001 — Quality Management System
- ISO 14001 — Environmental Management System
- ISO 45001 — Occupational Health & Safety
- Model datasheets and written test conditions on request
OEM & ODM Heat Pump Solutions
You can change the cabinet, badge, controller language, supply voltage and refrigerant configuration. The compressor and core heat exchanger stay ours — they are why the performance holds.
- Experienced R&D and manufacturing teams
- Professional sales and channel management
- Territory registered by country and industry
- Customs-ready documentation and priced spare-parts list
Published supply is 380–415V / 50 Hz three-phase. Confirm availability before ordering for a 60 Hz grid.
Acerca de Hetapro
Heating professional, since 2004.
HETAPRO designs and manufactures heat pumps for industrial process heat. The name combines “heating” and “professional” — design, product and service as one deliverable.
Heating professional, since 2004.
Our focus now is the heat most factories actually need: 95°C water and 85°C hot air, produced from ambient air without a waste-heat stream or a fuel boiler. Steam systems are supplied where a project, not a plant, pays for them.
Read More About UsSeleccione o diseñe productos exclusivos de bomba de calor para mejorar su marca.
Envíanos una consulta
Su información se mantendrá estrictamente confidencial.


